LR-60/60P Low-Rise Scissor Lifts
15
P/N 5900337 — Rev. F — December 2020
Assemble the Tow Cart (LR-60P only)
The Tow Handle, which is used only with the LR-60P, lets you move the Lift to other locations.
The following drawing shows how to set up the Tow Cart.
Raise the Platforms Off the Base (LR-60 only)
You need to raise the Platforms off the Base to access two of the three Anchor Bolt holes (see
Be sure to leave the Lift engaged on a Safety Lock when you raise it.
⚠
WARNING
BendPak strongly recommends using
at least two people
to lift the Platforms
off their Bases: one person to hold down the Base and one person to operate the
Forklift or Shop Crane to raise the Platforms.
Use care when raising the
Platforms off the Base
.
To lift the Platforms off the Base
:
1.
Use a Forklift or Shop Crane to raise the Platforms off the Base.
Make sure to hold down the Base while you raise the Platform.
Tip
Once the Platform and Base are separated by more than half an inch (~13 mm), you
can put industrial slings (straps) around a Platform to continue raising the Platforms off
the Base.
2.
When the Platforms get above the top Safety Lock, lower it back down onto the top Safety Lock.
Do
not
raise the Platforms a random distance; leave it on the top Safety Lock.
⚠
WARNING
Do not continue with the installation without first confirming that the Lift is securely
engaged on a Safety Lock.
Summary of Contents for LR-60
