LR-60/60P Low-Rise Scissor Lifts
17
P/N 5900337 — Rev. F — December 2020
Anchor the Bases (LR-60 only)
The Lift has three holes in the Base for anchoring it. Anchoring provides stability for the Lift.
Give a lot of thought to where you want the LR-60
before
anchoring it:
once the Lift is
anchored, it is extremely difficult to move
.
Concrete specifications are:
•
Depth
: 4.25 in (108 mm) thick
•
PSI
: 3,000 PSI, minimum
•
Cured
: 28 days, minimum
Anchor Bolt specifications are:
•
Length
: 4.75 inches
•
Diameter
: ¾ inch
•
Effective embedment
: 2.75 inches,
minimum
•
Anchor torque
: 85 – 95 pound feet (do not
torque less than 80 or more than 105)
Anchor Bolt holes must be at least 6 in / 152 mm away from expansion seams or cracked Concrete.
⚠
WARNING
Only use the factory-supplied parts that came with your Lift
. If you use
parts from a different source, you void your warranty and compromise the safety of
everyone who installs or uses the Lift.
To anchor the Lift
:
1.
Make sure you are wearing OSHA-approved (publication 3151) Personal Protective Equipment:
leather gloves, steel-toed work boots, back belts, hearing protection, and ANSI-approved eye
protection (safety glasses, face shield, or goggles).
2.
Make sure the Lift is in the desired location.
3.
If it is not already, raise the Lift as high as it will go, then engage it on the top Safety Lock.
Refer to
4.
Using the holes in the Bases as guides, drill each hole
4 in / 101 mm deep
.
Summary of Contents for LR-60
