LR-10000 Low-Rise Scissor Lift
25
P/N 5900075 — Rev. A1 — April 2019
Preparing the Power Unit
The Power Unit comes fully assembled from the factory. You need to attach it to the Power Unit Stand
(already done, as described in
), connect it to a power source, and fill the
Hydraulic Fluid Reservoir with Hydraulic Fluid.
The Power Unit for the LR-10000 is 208–240 VAC, 50/60 Hz, 1 phase. The Hydraulic Fluid Reservoir
holds about 5.65 liters (1.5 gallons) of Hydraulic Fluid.
The Lift uses electrical energy; if your organization has Lockout/Tagout policies, make sure to
implement them once the unit is connected to a power source.
⚠
DANGER
All wiring
must
be performed by a licensed, certified Electrician.
Refer to
⚠
CAUTION
The Power Unit’s motor is
not
thermally protected.
The Power Unit has multiple connections:
•
Hydraulic Line
. The Hydraulic Line should already be connected to the Power Unit. If it is not,
refer to
•
Power Source
. The Power Unit has to connect to an appropriate power source. A licensed,
certified Electrician is
required
to make this connection. The Electrician needs to provide an
appropriate Power Cord and Plug; these are
not
supplied with the Lift.
The following drawing shows the Power Unit of the LR-10000.
Drawing is not necessarily to scale. Your Power Unit may be different from what is shown here.
Summary of Contents for LR-10000
