LR-10000 Low-Rise Scissor Lift
19
P/N 5900075 — Rev. A1 — April 2019
Install the Safety Lock Release Handle
This section describes how to install the Safety Lock Release Handle, which moves the Safety Lock
Bar up so the Safety Locks cannot engage, allowing the Lift to be lowered back down to the ground.
Important
: The Safety Lock Release Handle can only be installed in one location on the Lift. That
location is under the Short Ramp on the left side of the Lift when you are looking at the
Short Ramp side of the Lift.
The following drawing shows the components involved in installing the Safety Lock Release Handle.
To install the Safety Lock Release Handle
:
1.
Find the Safety Lock Release Handle, the Safety Release Pivot, two Nut Caps, and one Bolt, Nut,
and Washer.
2.
Push the Safety Lock Release Handle through the hole on the left side of the Short Ramp until it
comes out the hole on the right side of the Short Ramp.
3.
Push on the Red Handle to guide the Safety Lock Release Handle through the Alignment Block.
4.
Keep pushing until the Stop Piece is up against the left side of the Short Ramp.
5.
Moving to the other end of the Safety Lock Release Handle, slip the Safety Release Pivot over the
end of the Safety Lock Release Handle coming out of the Alignment Block.
6.
Put on the Bolt, Washer, and Nut to secure the Safety Release Pivot.
7.
Finger tighten the Nut.
8.
Put the Nut Caps into place via the holes in the Safety Release Pivot.
9.
Finger tighten the Nut Caps.
10.
Move the Red Handle of the Safety Lock Release Handle up and back to make sure it is working.
11.
Use appropriate tools to fully tighten the Nut and the Nut Caps.
Summary of Contents for LR-10000
