LR-10000 Low-Rise Scissor Lift
14
P/N 5900075 — Rev. A1 — April 2019
Create Chalk Line Guides
Make sure to plan out, in advance, where the LR-10000 is going to go:
•
Clearance
. Before anchoring your Lift, make sure there is appropriate clearance on all sides of
the desired location and above.
•
Power Unit Stand
. The Power Unit Stand can be installed on the left or the right of the Lift
(when looking at it from the Short Ramp end). When installed on the left, the Power Unit Stand can
be up to 77 inches / 1,956 mm from the left side of the Lift. When installed on the right, the Power
Unit Stand can be up to 53 inches / 1,346 mm from the right side of the Lift.
•
Operator
. The operator at the Power Unit Stand
must
have a full, unobstructed view of the
LR-10000.
•
Power
. The Power Unit Stand must also be positioned near an appropriate power source, as that
is where the Power Unit is going to be.
•
Set up Chalk Line Guides
. Create Chalk Line Guides to make sure the LR-10000 is positioned
correctly.
To add Chalk Line Guides
:
1.
Decide where you want to locate the Lift.
2.
Create an Alignment Chalk Line where you want one end of the LR-10000.
Not all components shown. Neither the Safety Lock Release Handle nor the Power Unit Stand are
taken into consideration when creating Chalk Line Guides.
Summary of Contents for LR-10000
