Operation and settings
46
VMD460-NA_D00001_05_M_XXEN/01.2020
5.4.3
Settings
Settings can be password protected. If the password is enabled, all settings can still be
displayed. When an attempt is made to change settings, the password entry screen ap-
pears automatically:
Once a valid password has been entered, access will be granted to settings in all menus
until menu mode is exited.
If you cannot remember your password, contact the Bender service.
In principle, all preset response values can be changed, if this should be necessary. The
values can be changed in the third level of the menu (column "twice
") using
.
There are two different ways to exit the setting menu:
•
Save
and exit: „
“
•
Exit
without saving
: "ESC"
The menu structures in the settings contain different entries for each individual stand-
ard. These are listed in detail in
.
5.4.4
System
The following table gives an overview of the menu structure. The values can be
changed in the third level of the menu ("twice
" column) using
.
There are two different ways to exit the system menu:
•
Save and exit: „
“
•
Exit without saving: "ESC"
Response values for NS protection may only be changed in consultation
with the system operator!
Please enter
password:
0 0 0
