ben-e-bike TWENTYFOUR E-POWER PRO User Manual Download Page 12

Page: 12 / 63

12 BEN-

4 LUGGAGE

Incorrectly transported luggage can get into the spokes while driving and lead to falls. Incorrectly secured luggage

can fall and endanger your child and other road users.

•

Explain to your child that there are no objects to hang on the handlebar, e.g. shopping bags

•

Explain to your child that it is not allowed to attach objects to the frame.

•

Have your child only transport items in a suitable backpack

•

Explain to your child that it is necessary

5 THEFT PROTECTION

•

Explain to your child how a BEN

•

Give your child a sturdy chain-

as a bicycle stand.

6 TRANSPORT

If you cannot safely transport the BEN-

Incorrect mounting or the use of unsuitable bicycle carriers may damage the BEN

•

Only use approved bicycle carriers that allow the BEN

•

Inform yourself about the use of bicycle carriers, e

•

Secure the BEN-E-BIKE carefully so that it cannot slip.

-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

Incorrectly transported luggage can get into the spokes while driving and lead to falls. Incorrectly secured luggage

can fall and endanger your child and other road users..

lain to your child that there are no objects to hang on the handlebar, e.g. shopping bags

Explain to your child that it is not allowed to attach objects to the frame.

transport items in a suitable backpack

it is necessary to adapt the driving style while riding with

BEN-E-BIKE can be effectively protected against theft.

or U-lock that allows the BEN-E-BIKE to be fastene

-E-BIKE in the boot of your car, please use a suitable bicycle carrier

Incorrect mounting or the use of unsuitable bicycle carriers may damage the BEN-E-BIKE

Only use approved bicycle carriers that allow the BEN-E-BIKE to be transported upright.

Inform yourself about the use of bicycle carriers, e.g. contact your dealer.

BIKE carefully so that it cannot slip.

BIKE INSTRUCTION MANUAL

www.ben-e-bike.net
[email protected]

Incorrectly transported luggage can get into the spokes while driving and lead to falls. Incorrectly secured luggage

lain to your child that there are no objects to hang on the handlebar, e.g. shopping bags

with luggage.

against theft.

BIKE to be fastened to a fixed object, such

BIKE in the boot of your car, please use a suitable bicycle carrier.

IKE.

BIKE to be transported upright.

Summary of Contents for TWENTYFOUR E-POWER PRO
































































Search results

Summary of Contents for TWENTYFOUR E-POWER PRO

Reviews:

Related manuals for TWENTYFOUR E-POWER PRO

Brands by name

Popular brands

ben-e-bike TWENTYFOUR E-POWER PRO, User Manual

Search results

Summary of Contents for TWENTYFOUR E-POWER PRO

Reviews:

Related manuals for TWENTYFOUR E-POWER PRO

Brands by name

Popular brands