23 BEN-
SETTING THE SEAT POSITION
The seat post may break during use due to improper mounting. If you adjust the seat post, make sure that the
lower mark on the seat post (minimum insertion depth) is not visible (see arrow).
The saddle height should be adjusted so that your ch
not be maximally stretched in the lowest position of the crank. If the saddle is too high,
overcome this lowest point. If the saddle is too deep, knee pain can be the res
unfavourable, which will result in a faster fatigue of
•
To adjust the seat height, loosen the screw o
tool: Allen key 4)
•
Do not pull the seat post beyond the
•
As a general rule, the seat post must be inserted at least 90mm into the seat tube.
•
The released seat post can now be shifted in height. Make sure that the part of the seat post that is insi
the seat tube is always well greased (for example, with silicone oil).
•
If the seat post does not slide easily in the seat tube, do not use force.
•
Align the saddle straight by aiming over the saddle tip along the top tube.
•
Retighten the seat post clamp.
•
Check if the seat post is properly tightened
impossible, the post is correctly
-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
due to improper mounting. If you adjust the seat post, make sure that the
lower mark on the seat post (minimum insertion depth) is not visible (see arrow).
The saddle height should be adjusted so that your child can still reach the ground with the toes. The leg must then
not be maximally stretched in the lowest position of the crank. If the saddle is too high,
this lowest point. If the saddle is too deep, knee pain can be the result. In addition, the leverage will be
rable, which will result in a faster fatigue of your child.
To adjust the seat height, loosen the screw of the seat post clamp by turning it
post beyond the "minimum insertion depth mark on the shaft.
As a general rule, the seat post must be inserted at least 90mm into the seat tube.
The released seat post can now be shifted in height. Make sure that the part of the seat post that is insi
the seat tube is always well greased (for example, with silicone oil).
post does not slide easily in the seat tube, do not use force.
Align the saddle straight by aiming over the saddle tip along the top tube.
To do this, turn its screw clockwise and fix it with a torque of max. 5 Nm.
seat post is properly tightened. Hold the saddle with your hands and try to twist it. If
correctly fixed.
BIKE INSTRUCTION MANUAL
www.ben-e-bike.net
[email protected]
due to improper mounting. If you adjust the seat post, make sure that the
ild can still reach the ground with the toes. The leg must then
not be maximally stretched in the lowest position of the crank. If the saddle is too high, it won't be easy to
ult. In addition, the leverage will be
by turning it counter clockwise (required
mark on the shaft.
As a general rule, the seat post must be inserted at least 90mm into the seat tube.
The released seat post can now be shifted in height. Make sure that the part of the seat post that is inside
it with a torque of max. 5 Nm.
. Hold the saddle with your hands and try to twist it. If this is
