ben-e-bike TWENTYFOUR E-POWER PRO User Manual Download Page 10

Page: 10 / 63

10 BEN-

FURTHER ADVICE FOR PROPER USE

1 WEAR

Excessive wear and material fatigue as well a

•

Regularly check the condition of all components (see chapter "Maintenance").

•

If you detect any parts with cracks or colo

immediately

•

Have your BEN-E-BIKE inspected regularly by your dealer, especially during heavy use.

•

Do not let your child use the BEN

Like all mechanical components, bicycle components are wearing parts. High

increases wear. Different materials have individual

•

consult your dealer if you have any questions regarding

•

check the condition of all wear parts regular

•

Maintain wear parts regularly (see chapter "Cleaning and care").

Typical wear parts

The following wear parts wear out due to the intended use and are therefore excluded from warranty (see chapter

"Warranty"):

•

wheels, tubes and tyres

•

chain drive (chain, chain sprocket

•

bottom bracket

•

head set

•

gear shift cable and liner

•

brake pads

•

handlebar grips

Operational wear

The following wear parts can wear out due to aging or inten

•

frame

•

handlebar and stem

•

fork

•

the seat post may be scratched when being inserted or extracted, but this does not have any impact

neither on functionality nor longevity

-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

PROPER USE

Excessive wear and material fatigue as well as loosened screw joints increase the risk of accidents and injuries

Regularly check the condition of all components (see chapter "Maintenance").

parts with cracks or colour changes you should contact your specialized dealer

BIKE inspected regularly by your dealer, especially during heavy use.

Do not let your child use the BEN-E-BIKE if you notice excessive wear or loosened screw joints

Like all mechanical components, bicycle components are wearing parts. High stress and incorrect use

wear. Different materials have individual characteristics in terms of wear.

if you have any questions regarding wear parts of a BEN-E-BIKE.

heck the condition of all wear parts regularly (see chapter "Before every ride" and "Maintenance").

Maintain wear parts regularly (see chapter "Cleaning and care").

The following wear parts wear out due to the intended use and are therefore excluded from warranty (see chapter

chain sprocket, cassette, derailleur, etc.)

The following wear parts can wear out due to aging or intensive stress:

atched when being inserted or extracted, but this does not have any impact

ty nor longevity

BIKE INSTRUCTION MANUAL

www.ben-e-bike.net
[email protected]

s loosened screw joints increase the risk of accidents and injuries.

Regularly check the condition of all components (see chapter "Maintenance").

you should contact your specialized dealer

BIKE inspected regularly by your dealer, especially during heavy use.

BIKE if you notice excessive wear or loosened screw joints.

stress and incorrect use significantly

BIKE.

ly (see chapter "Before every ride" and "Maintenance").

The following wear parts wear out due to the intended use and are therefore excluded from warranty (see chapter

atched when being inserted or extracted, but this does not have any impact

Summary of Contents for TWENTYFOUR E-POWER PRO
































































Search results

Summary of Contents for TWENTYFOUR E-POWER PRO

Reviews:

Related manuals for TWENTYFOUR E-POWER PRO

Brands by name

Popular brands

ben-e-bike TWENTYFOUR E-POWER PRO, User Manual

Search results

Summary of Contents for TWENTYFOUR E-POWER PRO

Reviews:

Related manuals for TWENTYFOUR E-POWER PRO

Brands by name

Popular brands