ben-e-bike TWENTYFOUR E-POWER PRO User Manual Download Page 18

Page: 18 / 63

18 BEN-

PRIOR YOUR FIRST RIDE

In the event of unexpected behaviour of the BEN

traffic, e.g. when braking or shifting the gears.

•

Do not leave your child on the road with the BEN

bike and its operation.

After the first kilometres with a new bike

Therefore the function of individual compone

short inspection after the first 200 km.

Your BEN-E-BIKE should have been fully assemble

BIKE by yourself and do not have the appropriate technical knowledge and tools, this may have an effect on the

warranty.

BEN-E-BIKEs have been explicitly made ready for

The final assembly and adjustment by

"Warranty").

•

If the BEN-E-BIKE has not been set up for your child, have it adjusted by your specialist dealer (see chapter

"Settings >> Seating position").

•

Get yourself familiar with the BEN

explain all features of the bike

•

Practice with your child away from

the BEN-E-BIKE

•

Have your child practice braking at low speed (see chapter "Notes >> Brake" and "Operation >> Brake").

All BEN-E-BIKES are delivered so that the front brake is operated with the left brake lever. This may be

differ from other children's bicycles. You

careless operation of the front brake can lead to a fall (by blocking the front wheel or a rollover).

•

Disc brakes need to be used several times before they deliver maximum brake force.

•

Finally the brakes of the BEN-E

used children's bicycle. Your child

-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

r of the BEN-E-BIKE, your child may not be able to concentrate on the road

raking or shifting the gears. There is an increased risk of accidents and inju

Do not leave your child on the road with the BEN-E-BIKE unless he/she is familiar with the behaviour of the

with a new bike, gear cables and spokes can extend or screw joints may loosen

components on the BEN-E-BIKE could be affected

short inspection after the first 200 km.

been fully assembled and adjusted by your dealer. If you have mounted the

yourself and do not have the appropriate technical knowledge and tools, this may have an effect on the

BIKEs have been explicitly made ready for the final assembly by a specialist dealer

by a specialized dealer is a precondition for full warranty (see chapter

BIKE has not been set up for your child, have it adjusted by your specialist dealer (see chapter

"Settings >> Seating position").

h the BEN-E-BIKE before you drive together with your child for the first time and

to your child.

Practice with your child away from road traffic so that he / she can get used to the driving characteristics of

Have your child practice braking at low speed (see chapter "Notes >> Brake" and "Operation >> Brake").

BIKES are delivered so that the front brake is operated with the left brake lever. This may be

other children's bicycles. Your child may not have to get used to the new arrangement, as

careless operation of the front brake can lead to a fall (by blocking the front wheel or a rollover).

need to be used several times before they deliver maximum brake force.

E-BIKES may deliver way stronger brake force than the brake of a previously

Your child may need some time to get used to this extra of brake power

BIKE INSTRUCTION MANUAL

www.ben-e-bike.net
[email protected]

BIKE, your child may not be able to concentrate on the road

s and injury.

BIKE unless he/she is familiar with the behaviour of the

screw joints may loosen.

BIKE could be affected. Contact your dealer for a

adjusted by your dealer. If you have mounted the BEN-E-

yourself and do not have the appropriate technical knowledge and tools, this may have an effect on the

final assembly by a specialist dealer.

warranty (see chapter

BIKE has not been set up for your child, have it adjusted by your specialist dealer (see chapter

your child for the first time and

can get used to the driving characteristics of

Have your child practice braking at low speed (see chapter "Notes >> Brake" and "Operation >> Brake").

BIKES are delivered so that the front brake is operated with the left brake lever. This may be

r child may not have to get used to the new arrangement, as

careless operation of the front brake can lead to a fall (by blocking the front wheel or a rollover).

need to be used several times before they deliver maximum brake force.

than the brake of a previously

may need some time to get used to this extra of brake power.

Summary of Contents for TWENTYFOUR E-POWER PRO
































































Search results

Summary of Contents for TWENTYFOUR E-POWER PRO

Reviews:

Related manuals for TWENTYFOUR E-POWER PRO

Brands by name

Popular brands

ben-e-bike TWENTYFOUR E-POWER PRO, User Manual

Search results

Summary of Contents for TWENTYFOUR E-POWER PRO

Reviews:

Related manuals for TWENTYFOUR E-POWER PRO

Brands by name

Popular brands