22 BEN-
•
Explain to your child that pedalling
•
Explain to your child that it is not allowed to pedal reverse when shifting gears
•
If you or your child feel insecure when operating the gearshift, contact your dealer for further explanation.
TRIGGER SHIFT LEVER
•
To shift down one gear (= larger rear sprocket and therefore higher pedal
gear lever.
•
To shift up one gear (= smaller rear sprocket and thus lower peda
lever.
•
Several gears can be skipped simulta
NOTES ABOUT THE SETUP
An improper setup of the bikes can lead to component damage or material
•
If you have no experience in adjusting bicycle components, contact your specialized dealer
Incorrect tightening of screws can lead to material fatigue. Bolts may soften when tightened too heavy and can
break.
•
If you detect loose screw joints, have them tightened by your dealer with a torque wrench
•
If you tighten screws by yourself, check the corresponding torq
can be found in the appendix to this manual
Your dealer will take care of the complete assembly of your BEN
brake lever settings individually for your child (see chap
over the BEN-E-BIKE, check that your child can ride comfortably and safely with the
adapted to your child. If you make adjustments
the appendix of this manual, and always use a torque wrench when screwing. If you adjust the settings by
yourself, check the settings thoroughly and professionally before using the BEN
-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
pedalling with force should be avoided when shifting gears.
it is not allowed to pedal reverse when shifting gears.
If you or your child feel insecure when operating the gearshift, contact your dealer for further explanation.
gear (= larger rear sprocket and therefore higher pedalling cadence
gear (= smaller rear sprocket and thus lower pedalling cadence), push or pull the rear gear
Several gears can be skipped simultaneously when switching down the gears.
An improper setup of the bikes can lead to component damage or material failure.
If you have no experience in adjusting bicycle components, contact your specialized dealer
ng of screws can lead to material fatigue. Bolts may soften when tightened too heavy and can
If you detect loose screw joints, have them tightened by your dealer with a torque wrench
yourself, check the corresponding torques. A list of the most important torques
can be found in the appendix to this manual.
Your dealer will take care of the complete assembly of your BEN-E-BIKE and adjust the handlebar,
brake lever settings individually for your child (see chapter "Before the first ride" or "Warranty"). When handing
BIKE, check that your child can ride comfortably and safely with the bike
adapted to your child. If you make adjustments by yourself, consult your dealer for the tightening torques or
appendix of this manual, and always use a torque wrench when screwing. If you adjust the settings by
yourself, check the settings thoroughly and professionally before using the BEN-E-BIKE!
BIKE INSTRUCTION MANUAL
www.ben-e-bike.net
[email protected]
when shifting gears.
.
If you or your child feel insecure when operating the gearshift, contact your dealer for further explanation.
cadence), press the front
ling cadence), push or pull the rear gear
If you have no experience in adjusting bicycle components, contact your specialized dealer.
ng of screws can lead to material fatigue. Bolts may soften when tightened too heavy and can
If you detect loose screw joints, have them tightened by your dealer with a torque wrench.
ues. A list of the most important torques
BIKE and adjust the handlebar, callipers and
ter "Before the first ride" or "Warranty"). When handing
bike and that all settings are
r the tightening torques or check
appendix of this manual, and always use a torque wrench when screwing. If you adjust the settings by
!
