background image

 

27 

 
 

Move the cursor to any position on the display. “P” is the digit position where the cursor 
is to be moved to. P is represented as a 2 digit hex number. Move the cursor to any 
position on the display. 

 

13.

 

Reset <IB><40> 

All characters are erased and settings are returned to the power-on conditions. 

 

14.

 

Select Character Inversion <1 F><72) 

Invert all the pixels for each character.  

 

15.

 

Delete Character Inversion <1F><52> 

Restores character inversion to its default font. 

 

16.

 

Blink the Current Display <IF><45> 

Blink all characters on the display. 

 

17.

 

Delete Display Blink <IF>c65> 

Stop character blinking. 

 

18.

 

Down Load Font <1 B><26><X> <F> <F> <F> <F> <F> 

Assign a standard keyboard key a different style font. 

 

19.

 

Delete Down Load Font <IB><3F><X> 

A down loadable font can be restored to its original value. 
 

20.

 

Set pass-through Code <01> 

Set line display on pass-through mode. All data codes will be by-pass to the peripheral 
device when the line display on direct display mode. 

 

21.

 

Set direct display codes <21> <23> <02> 

Set line display on direct display mode. Default mode. 

Summary of Contents for LDX1000






























































Reviews: