6
4 USB DRIVER INSTALLATION
4.1 WINDOWS 7 and WINDOWS 8 and WINDOWS 10
The USB drivers are available on our web site at www.logiccontrols.com. Please download
and unzip the driver files before installation. There are two types of driver interface available.
If the POS software is only able to access COM port for the pole display, use the virtual
COM port interface. After the driver is installed, the USB interface will be assigned a COM
port name so that the POS software will be able to communicate with the USB display as a
COM port. Note that the operating system will assign the display a different COM port
number if the display is plugged into a different USB port. Another driver interface use a
specific device name (\\.\LCPD3\, \\.\LCLD9\, or \\.\LCLD1\) to access the pole display
directly.
Install this driver if you are using OPOS or the POS software was tailored to use this device
name.
1. DO NOT plug the device in USB port
2. Ru
n “install.bat” batch program in this driver package:
3. Plug the device in USB port and wait for the hardware wizard message box to
display:
