5
Easymix 150 OPERATORS MANUAL
READ THESE SAFETY INSTRUCTIONS
Please read and understand all running/safety instructions before operating this machine.
SAFETY INSTRUCTIONS
GB
Before starting the mixer
Ensure engine oil is filled to correct level before
operating mixer.
Note:
The engine must be lifted to
the horizontal position when filling and checking oil.
Check that all guards are in position and correctly fitted.
DO NOT
wear loose clothing or jewellery that may
become entangled in the workings of this machine.
Suitable clothing as follows should meet relevant
EEC/local safety standards: overalls, work boots,
goggles, face mask, gloves and ear defenders etc.
DO NOT
tip mixer onto the drum mouth when
motor is running.
Ensure that any trailing cable is protected against
damage and not liable to be tripped over or
trapped underneath the mixer.
We recommend the use of an Residual Current
Device on 230v electrics.
Remove all packaging material before operating.
When operating the mixer
Keep unauthorised persons away from mixing drum.
Keep area around the mixer clear of obstructions
which could cause persons to fall onto moving parts.
Always ensure mixer is on level ground before mixing.
DO
become familiar with the controls before
operating this machine.
DO
ensure that all guards are fitted in the correct position.
DO
ensure plenty of ventilation when running
diesel/petrol engines in a confined area.
DO
replace any worn/damaged warning decals.
DO
ensure the drum is rotating while emptying
the mixer.
DO
always switch off and remove the plug from
the socket if leaving the machine unattended.
DO NOT
use as a wheel barrow. Disconnect from
power supply before moving.
BEWARE
of the Danger Zones & Hot Zones.
BE A WARE
of exhaust venting directions.
Emergency Stop
If you have to turn off the mixer in a emergency
you must:
Electric: either turn off at switch or at the mains,
Petrol: turn the engine switch off, see engine manual.
Fire Fighting
If your mixer catches fire, turn off the electric supply.
Using a dry powder or C0
2
fire extinguisher put out
the fire. If the fire can not be put out, keep away and
call the fire brigade.
If you are in any doubt about the safety condition of
your machine, please contact your Belle authorized
Service Dealer.
Warning - Important
Should the socket outlets in your home not be suitable for the plug supplied with your product, the plug
must be removed (cut-off if it is a moulded plug and disposed of) and an appropriate plug fitted. Follow wiring instructions
carefully. Do not connect either core to the earth pin, as this is a Class II Isolated Product.
BLUE = NEUTRAL BROWN = LIVE
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is is
marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the terminal which is is
marked with the letter L or coloured Red.
Summary of Contents for EASYMIX 150
Page 16: ...16 Easymix 150 OPERATORS MANUAL ...
Page 22: ...22 Easymix 150 OPERATORS MANUAL ...
