31
31
se
ct
io
n
1
2
3
4
5
6
I can’t connect to the Internet wirelessly
If you are unable to connect to the Internet from a wireless
computer, please check the following items:
1.
Look at the lights on your wireless router. If you’re using a
Belkin Wireless Router, the lights should be as follows:
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
If your Belkin Wireless Router’s lights have the above
characteristics, go to number
2
below.
If this is
NOT the case, make sure:
• The router’s power cord is plugged in.
• All cables are connected between the router and
the modem.
• All the modem’s LEDs are functioning correctly. If not, see
your modem’s user manual.
• Reboot the router.
• Reboot the modem.
If you continue to have issues, please contact Belkin
Technical Support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer’s user guide.
2.
Open your Wireless Utility software by clicking on the icon in
the system tray at the bottom, right-hand corner of the screen.
If you’re using a Belkin Wireless Card, the tray icon should
look like this (the icon may be red, yellow, or green):
3.
The Belkin Wireless Utility window will display the available
networks in the “Available Networks” tab. Available networks
are wireless networks you can connect to.
If you are using a Belkin 802.11g (125 HSM) Wireless Router, or
Belkin 802.11g (54g) Wireless Router, “Belkin54g” is the
default name.
Troubleshooting
