790407_WN4201E-LF-AK_wrs g dc_mnl-v2_1008-2007.doc1
Page 49 of 52
the user’s authority to operate the equipment.
Canada-Industry Canada (IC)
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p)
is not more than that permitted for successful communication.
This device has been designed to operate with an antenna having a maximum
gain of 2 dBi. An antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 Ohms.
The wireless radio of this device complies with RSS 210 Industry
Canada. This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003
du Canada.
Operation is subject to the following two conditions: (1) this device may not cause
interference and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking comply with the R&TTE
Directive (1995/5/EC) issued by the Commission of the European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets are the equivalent international standards).
• EN 60950-1 (IEC60950-1) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 301 489 General EMC requirements for radio equipment
To determine the type of transmitter, check the identification label on your
Belkin product. Products with the CE marking comply with the EMC Directive
(89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued by the
Commission of the European Community. Compliance with these directives
implies conformity to the following European Norms (in brackets are the
equivalent international standards).
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity
• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950-1 (IEC60950-1) – Product Safety
Products that contain the radio transmitter are labeled with CE 0682 or CE alert
marking and may also carry the CE logo.
Belkin International, Inc., Limited Lifetime Product Warranty
