Belkin F5D7000H User Manual Download Page 48 | Manualshive

Page: 48 / 52

background image

790407_WN4201E-LF-AK_wrs g dc_mnl-v2_1008-2007.doc1

Page 48 of 52

FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin International, Inc., of 501 West Walnut Street,
Compton, CA 90220, declare under our sole responsibility that the product,
F5D7000v8,
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

Nevertheless, the device shall be used in such a manner that the potential for
human contact during normal operation is minimized.

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

Federal Communications Commission Notice

IEEE 802.11b or 11g or 11n operation of this product in the U.S.A is firmware-
limited to channels 1 through 11. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Statement

Modifications

The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Belkin International, Inc., may void

«
...
46
47
48
49
50
...
»

Summary of Contents for F5D7000H





















































Reviews:

No comments

Related manuals for F5D7000H

Brand: Abus Pages: 60

PowerBeam AC Gen2

Brand: Ubiquiti Pages: 22

Brand: IDT Pages: 292

PacketMate 1000

Brand: General DataComm Pages: 20

Brand: ZyXEL Communications Pages: 348

Brand: Socket Pages: 18

Brand: WatchNet Pages: 2

Brand: Xtatix Pages: 12

Brand: Alcatel Pages: 158

Brand: MikroTik Pages: 5

Brand: Foscam Pages: 92

Brand: IBM Pages: 288

Brand: DataDirect Networks Pages: 97

Brand: Cabletron Systems Pages: 54

Brand: Costar Pages: 24

Digi Connect WAN

Brand: Digi Pages: 3

Brand: Digi Pages: 13

Brand: Westermo Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands