Belden HIRSCHMANN IT MAMMUTHUS MTM8000 Series, User Manual

Page: 39 / 65

39
Install MAMMUTHUS switch
Issued in December, 2020
2
Installation
These devices are developed for the use in the commercial environment.
At the time of delivery, the devices are ready for being put into operation.
Execute the following steps to install and configure the device:

Unpacking and inspection
 Install the cover and power module (optional)
 Device installation and earthing
 Operate the device
 Install SFP transceiver (optional)
 Connect the data cable
 Fill in the label
2.1 Unpacking and inspection
 Check whether the packing box contains all articles specified in
"Delivery Items" on Page 59.
 Check the transportation and damage of the parts and components one
by one.
2.2 Install the power module (optional)
2.2.1 Install the power module
Hirschmann IT provides the power module for operation being ready. You
may choose to install the power module during the device operation.
Operate in the following steps:
 Dismantle the cover plate (if installed) from the power module slot of the device.

Insert the power module into the slot.