Belden HIRSCHMANN IT MAMMUTHUS MTM8000 Series, User Manual

Page: 6 / 65

Install MAMMUTHUS switch
Issued in December, 2020
6
Safety Guideline
Warning
Uncontrolled machine action
To avoid uncontrolled machine action due to data loss, configure all data
transfer devices separately.
Before starting any machine controlled by data transfer, be sure to
complete the configuration of all data transfer devices.
Failure to comply with these guidelines may result in death, serious injury
or equipment damage.
 General Safety Guideline
This device shall be operated with electricity. Improper use of the device
will result in personal injury or significant property loss. Whether this
device can be properly and safely operated depends on whether the
handling process is proper, whether the storage and installation
operation are reasonable, and whether the operation and maintenance
procedures are firmly developed and strictly observed.
 Before connecting any cable, read this article, safety guideline and
warning.
 Only operate the device without any damaged component.
 Confirm that there is no component to be repaired in the device. In
case of the device damage or fault, it is required to cut off the power
supply and return the device to Belden for inspection.

Qualification requirements for the operators
 Only the qualified person can operate this device.
The qualified personnel shall have the following features:

The qualified personnel shall receive proper training. Training and
related practical knowledge and experience is the prerequisite for
obtaining the product operation qualification.
Only when these
prerequisites are met, can the operator implement the earthing and
labeling on the circuit, device and system according to the current
safety technical standard.

The qualified personnel shall know the danger in their work.
 The qualified personnel shall be familiar with how to handle these