Belden HIRSCHMANN IT MAMMUTHUS MTM8000 Series, User Manual

Page: 10 / 65

10
Install MAMMUTHUS switch
Issued in December, 2020
 Device enclosure
Only the technician authorized by the manufacturer can be allowed to
open the enclosure.
 Keep the air vent unblocked, to ensure good air circulation.
 Ensure that there will be he space of at least 3.94-inch (10cm) in
front of the air vent of the enclosure.
 During the operation or shortly after the shutdown of the device, do
not touch the enclosure. Hot surface will cause any possible
damage. Install the device horizontally in the machine cabinet or
vertically on the flat surface.
Do not place the device on the tabletop for operation. Refer to
"Device Installation and Earthing" on Page 38.
 Operate the device in the maximum ambient air temperature and
stacking device: when installing the device, ensure that there is at
least the space available for the machine frame (about 5cm) above
the device, to facilitate smooth discharge of heat out of the device
enclosure.
 If you operate the device in the 19" switch cabinet: install the
slide/install guide rail to support the weight of the device.

Requirements for the installation station
This device can only be operated at the specified ambient temperature-
ambient air temperature at 2 inch (5cm) away from the device- and at
relative humidity.
 When choosing the installation position, ensure the compliance with
climatic threshold as stipulated in the technical data.
 This device is used in the environment that the maximum pollution
class conforms to the technical data code.