Belden 934 691-001, Technical Manual

Page: 60 / 68

Technical data
60
10.6 Outputs
Technical manual LioN-P/ -R EtherNet/IP
Release 1.4 02/2016
10.6 Outputs
10.7 LEDs
Output connection Typically 1.6 A (2 A for LioN-P) as per IEC
61131-2
Nominal output current per channel:
Signal status “1”
Signal status “0” 1.6 A (2 A for LioN-P), see Info 1
max. 1.6 A (2 A for LioN-P)
Max. 1 mA (according to specification)
Signal level of the outputs:
Signal status “1”
Signal status “0” Min. (V
L
– 1 V)
max. 2 V
Short-circuit protection Yes
Max. output current per module As per U
L
approval: 9 A (12 A see Info 2)

(LioN-P: 16 A
Overload protection Yes
Number of digital channels 0 with 16 DI
16 with 16DO
8 with 8DI/8DO
Channel type Normally open, p-switching
Status indicator LED yellow per channel A, LED white per
channel B
Diagnosis indicator LED red per channel
Port M12 socket, 5-pin
See pin assignment
Info 1: With inductive loads of consumption category DC13 (EN60947-5-1), the outputs can
connect currents of 1.6 A at a frequency of 1 Hz.
Info 2: Technically possible and approved under the following conditions:
 Looped sensor/system power supply max. 2.5 A
 Power supply cable STL 204 (5 x 1.0 mm²)
 Ambient temperature max. 40 °C
Table 34: Information on the outputs
U
S
Green System/sensor power supply, voltage level
18 V <= U
S
<=30 V
Red System/sensor power supply, voltage level
18 V <= U
S
<=30 V
Off No system/sensor power supply
Table 35: Information on the LED colors