Belden 934 691-001, Technical Manual

Page: 27 / 68

Starting operation
Technical manual LioN-P/ -R EtherNet/IP
Release 1.4 02/2016
5.1 Downloading and installing the
EDS file
27
5 Starting operation
5.1 Downloading and installing the EDS file
An EDS file is required for the configuration of a module in the controller.
Each of the 3 module variants requires its own EDS file. You have the option
of downloading the EDS file from our website or asking our support team to
send it to you. The address of the website is:
http://www.beldensolutions.com/de/Service/Downloadcenter/

Software_Lumberg
The EDS files are grouped together in an archive file with the name LioN-P
ETHERNET-IP EDS V3.9 . Download this file and unpack it.
The archive contains the following EDS files:
 EDS-V3.9-LumbergAutomation-0980ESL811-yyyymmdd.eds
 EDS-V3.9-LumbergAutomation-0980ESL812-yyyymmdd.eds
 EDS-V3.9-LumbergAutomation-0980ESL813-yyyymmdd.eds

EDS-V3.9-LumbergAutomation-0980ESL311-xxx-yyyymmdd.eds

EDS-V3.9-LumbergAutomation-0980ESL312-xxx-yyyymmdd.eds

EDS-V3.9-LumbergAutomation-0980ESL313-xxx-yyyymmdd.eds

EDS-V3.9-LumbergAutomation-0980ESL391-xxx-yyyymmdd.eds

EDS-V3.9-LumbergAutomation-0980ESL392-xxx-yyyymmdd.eds

EDS-V3.9-LumbergAutomation-0980ESL393-xxx-yyyymmdd.eds
yyyymmdd stands for the date on which the file was issued.
Install the EDS file for the module variant used with the aid of the hardware
or network configuration tool of your controller manufacturer. After the
installation, the modules are available in the hardware catalogs as a "General
Purpose Discrete I/O" device.