Belden 934 691-001, Technical Manual

Page: 35 / 68

Starting operation
Technical manual LioN-P/ -R EtherNet/IP
Release 1.4 02/2016
5.4 Configuring the controlling
35

Enter a name for the module and the correct IP address. In this example,
the name is
Name01
and the IP address
192.168.100.10
.

Click the "Change" button and change the setting for the module revision,
electronic keying, and connection type.

Select the connection type. This specifies which process and diagnostic
data the module provides.

In the "Connections" folder of the "Module Properties", you will see the
selected connection type. This folder also lets you set the "Requested-
Packet-Interval (RPI)" and the input type ("Input Type"). A value of 5 ms
is the minimum for parameter RPI.