MV-800 User Manual
MV-800-RP Multiviewer Rear Panel (1312)
MV-800 Hardware
Issue 2 Revision 1
Page 16
© 2019 Grass Valley, a Belden Brand
The Multiviewer display outputs come from SFP modules fitted into the SFP cages on the
MV-800 Rear Panel module’s rear plate. SFP blanking plugs must be fitted if an SFP is not fitted
into any of the cages.
2.2.1 Connectors
Table 5 describes each connector type.
Table 5
MV-800 Integrated Multiviewer 1312 Rear panel Connectors
Connector
Description
Display Outputs 1 to 12
Multiviewer video wall display outputs.
6-off SFP cages for SFP modules
[See note 1]
:
•
2-off SDI Coax outputs per SFP,
•
or 2-off SDI Fiber outputs per SFP,
•
or 1-off HDMI output per SFP.
Monitor Connectors 1 and 2
Not currently used
USB connectors A and B
Not currently used
LTC & GPIO Connector
26 Way High Density “D” Type female connector,
see Table 8 on page 19 for pinout details.
1G Ethernet Ports 1 and 2
2-off 1 Gbps, SFP+ Ethernet sockets, RJ45
10G Ethernet Ports 3 and 4
2-off 10 Gbps, SFP+ Ethernet sockets, RJ45
(10G network interfaces. Not used.)
Note 1:
SFP blanking plugs must be fitted if no SFP is present.
