Belden 1312, User Manual

Page: 39 / 71

Issue 2 Revision 1 Page 21 © 2019 Grass Valley, a Belden Brand
3 MV-800 Hardware Installation
3.1 Introduction
This section describes the installation of the MV-800 Integrated Multiviewer Integrated
Multiviewer hardware. Installation can be carried out while the Sirius 800 router is operating,
without impacting the main routing function.
If the MV-800 Integrated Multiviewer is being fitted to an existing, installed router, then the
router frame’s module slots for the MV-800 hardware must be identified. Slot identification is
part of the MV-800 Integrated Multiviewer hardware installation instructions contained in this
section.
An MV-800 Integrated Multiviewer Quick Setup Guide is shipped with the module and is also
available as a download from Grass Valley.
Product Overview , on page 1 lists the MV-800 Integrated Multiviewer product’s option
components, see MV-800 Components , on page 6 and Order Codes , on page 8.
MV-800 hardware installation comprises the following steps:
1 Initial Checks and Actions , on page 22.
2 Identifying Modules and Slots in Router , on page 25.
3 Removal Preliminaries , on page 33.
4 Module Removal Procedure , on page 34.
5 Fitting Preliminaries , on page 35.
6 Connecting Cables , on page 39.
The following sections describe these installation steps. More than one MV-800 unit may be
fitted to a Sirius router and these instructions cover the fitting of one or more units.
Note: If your Sirius 800 router has been purchased from Grass Valley with the
MV-800 Integrated Multiviewer Integrated Multiviewer option already
fitted, then

the MV-800 hardware installation task just comprises making
connections to the MV-800 Integrated Multiviewer Rear Panel at the
rear of the router

(See Connecting Cables , on page 39).
CAUTION

Electrostatic Damage
Static precautions must be observed when handling,
inserting or removing modules.