background image

xiv

Notices

Safety and EMC Standards

This equipment complies with the following standards:

Safety

Information Technology Equipment - Safety Part 1

EN60950-1: 2006

Safety of Information Technology Equipment Including Electrical Business Equipment.

UL1419 (4

th

 Edition) 

Standard for Safety – Professional Video and Audio equipment (UL file number E193966)

EMC Standards

This unit conforms to the following standards:

EN55032:2015 (Class A) 

Electromagnetic Compatibility of multimedia equipment - Emission requirements

EN61000-3-2:2014 (Class A) 

Electromagnetic Compatibility - Limits for harmonic current emissions

EN61000-3-3:2013

Electromagnetic Compatibility - Limits of voltage changes, voltage fluctuations and flicker

EN55103-2:2009 (Environment E2)

Electromagnetic Compatibility, Product family standard for audio, video, audio-visual and 
entertainment lighting control apparatus for professional use. Part 2. Immunity

FCC / CFR 47:Part 15 (Class A)

Federal Communications Commission Rules Part 15, Subpart B

Caution to the user that changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate the equipment.

WARNING

This equipment is compliant with Class A of CISPR 32. In a residential 
environment this equipment may cause radio interference.

Summary of Contents for 1312








































































Reviews: