MV-800 User Manual
MV-800 Components
Product Overview 1.6
Issue 2 Revision 1
Page 6
© 2019 Grass Valley, a Belden Brand
1.6 MV-800 Components
The MV-800 Integrated Multiviewer option consists of some hardware modules fitted into front
and rear slots of a Sirius 800 router frame. The multiviewer may be purchased already fitted
into a new Sirius 800 router from Grass Valley or bought separately as a hardware upgrade
option, to be fitted to an existing Sirius 800 router. One or more MV-800’s may be fitted to a
router.
, on page 21 shows which Sirius router frame slots are used for
the MV-800.
When fitting the MV-800 into an existing router, the relevant router slots may already be used
by other Sirius 800 option modules and, in this case, some or all of those modules need to be
removed as part of the MV-800 installation.
For example, an existing router may already be fitted with the Sirius Multiviewer Output option
(i.e. router SDI outputs provided for an
external
multiviewer).
If in doubt, contact Grass Valley Support.
The MV-800 Integrated Multiviewer requires:
•
1-off router front module slot and its corresponding rear module slot, per MV-800, in a
router frame.
•
1-off Sirius 5902 Multiviewer Crosspoint module fitted to the router.
•
Sirius 800 router controller software version 3.17.4 or later.
•
Grass Valley RollCall Control Panel software version 4.16.11 or later.
•
Grass Valley Orbit Client software version 2.1 or later.
One MV-800 comprises a front module (5934) and a rear module (1312). Several factors
determine the parts required for an MV-800 installation, including:
•
Model of Sirius router.
•
Existing router options fitted.
•
How many MV-800’s are being fitted to the router.
The list of front modules, rear panels etc. required for an MV-800 installation is given in Table 2.
