background image

2122.6-0000010 OM 

 

197

 

5.6.3 Guidelines for safe use of leveling jacks and statement of proper places 

for their installation 
 

Use leveling jacks to lift tractor, and after lifting insert backing blocks and limit stops 

under the front axle beam, rear wheel semi-axles, or base components of the tractor 
frame. 
 

Places for leveling jack installation on the tractor are marked by a sign shown in fig-

ure 5.6.1. 

 

 

Figure 5.6.1

 

– Sign of a place for leveling jack installation 

 

To lift tractor rear elements, set leveling jacks (or a single jack) under the rear semi-

axle tube as illustrated in figure 5.6.2. 
 

 

 

Figure 5.6.2 – Scheme of leveling jack installation for lifting tractor rear elements 

 

To lift tractor front elements, set leveling jacks (or a single jack) under the front driv-

ing axle beam tube, as illustrated in figure 5.6.3.

 

 

 

 

Figure 5.6.3 – Scheme of leveling jack installation for lifting tractor front elements 

a)  Tractor rear view   

b)  Tractor view underneath   

https://tractormanualz.com/

Summary of Contents for 2122.6

























































































































































































































































Reviews: