2122.6-0000010 OM
125
Figure 4.3.2
- Rear lift linkage diagramm of “LL-2” type
Table 4.3.1 – Basic parameters and coupling dimensions of RLL
LL-3
2)
LL-2
Standard size (configuration)
of the device
(figure 4.3.1)
(figure 4.3.2)
1 Category (acc. to ISO 730-1)
Category 3
Category 2
2 Design features
It consists of three links (one upper and two lower),
connected with the tractor with hinge joints, free
ends of links with hinge joints are connected to the
implement connecting elements while coupling
3 Assignment
For connection (mounting) or coupling of mounted,
semi-mounted implements
4 Lower links
Solid with on-board control system and changeable
hinge joints
5 Lower links length, mm
1060
1060
6 Hinged joint width of the upper
(lower) link, mm
51 (45)
51 (45)
7 Diameter of a rear-end hinged
joint pin of the upper link, mm
32 25
8 Diameter of holes in rear hinge
joints of lower links, mm
37 28,7
9 Distance between PTO shaft end
extension butt end and suspension
axis, mm
595 608
10 Column height
1)
, mm
685
610
11 Length of the suspension axis
along the shoulders
1)
, mm
965 825
12 Lifting capacity of the device,
kN
3)
:
а
) on the suspension axis;
b) at overhang of 610 mm from
the suspension axis
65
45
65
45
________________________________________________________________________
1)
Dimension refers to the implement coupled.
2)
The recommended type for basic use.
3)
It is not allowed to overload RLL higher than the tire load norm specified in table 3.2.2.
PTO
area
PTO shaft end extension
https://tractormanualz.com/
