GYRO WRAP™
Signature
®
Series
1MANUL248
Belanger, Inc. * PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
7
Introduction
Congratulations on your purchase of the Belanger® Signature® Gyro Wrap. All the main frame
components and the arm components are constructed of aluminum and then powder coated. The
powder coat finish will give the machine a fresh new look for many years and is easier to maintain
and clean. The hub shafts are constructed of a high strength stress proof steel and then cadmium
plated for added corrosion resistance.
The Signature® Gyro Wrap is offered as an electric or hydraulic drive machine. The arms are
controlled by a single air panel which is then connected to a single air-over-oil system for each arm
assembly. The air-over-oil system then utilizes a flow control valve on the extend and retract ports of
the cylinder to ensure a smooth and consistent stroke every cycle.
Whether you have already operated a car wash, or you are new to our industry, you know the
importance of the appearance of a car wash and its equipment to the customer.
Read through the entire manual to familiarize you with the Gyro Wrap™ before installation. When
installation is completed, you will want to keep this manual as a guide to proper maintenance.
It is imperative that wheels are spinning during any period that the
conveyor is activated.
