Belanger Fusion X2 PRO Owner'S Manual Download Page 46

Page: 46 / 68

FUSION

™ CARWASH CONTROLLER

5-10

Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL965

Chapter 5 Operator Interface/Wash Setup Screens

Setup

Setup / Loading

Loading Setup 2 (second screen)

•

Minimum After Cars

The system will NOT allow the Dollie up for the next vehicle until the user-defined

Minimum Distance is reached after the vehicle passes through the Photo-Eye. Set to zero to disable this

function.

Vehicles can be closer together than this distance since the measurement is taken from the rear

bumper of the lead vehicle to the back of the tire position when Dollie-Up allowed.

•

Treadle Eval Front

: This setting should always be enabled except when attended front-pull systems with

Treadle that wish to operate front-pull from Dollie Call only.

•

Disable/Enable

–

Front Pull, No Treadle

: When selected, the front tire dollie comes up when the “Dollie Call”

is pressed. The rear tire Dollie will come up after the user-selected number of inches after the front Dollie. The

rear tire distance is “FP NO TREADLE BACK TIRE DISTANCE”. (This function can be used if you are

experiencing trouble with the treadle on an attended, Front Tire Pull location).

•

Front Pull No Treadle Back Tire Distance

: The distance that will raise rear tire dollie when set in front pull,

No Treadle. Set large enough to get dollie behind largest

customers’

rear tire.

•

Rear Push No Treadle

: This function toggles back and forth between “Enabled” and “Disabled”. When

ENABLED

, the system will NOT evaluate the treadle and each dollie is assumed “Rear Tire”. (This function

can be used if you are experiencing trouble with the Treadle or on a 1-Step, Unattended, Rear Tire Push

system).

•

Auto Size Dollie

: This

function toggles back and forth between “Enabled” and “Disabled”. When set to Enabled

(Auto)

, the system will send “Auto Size Dollie” when wash is entered into queue. This option is for “1 Step

Loading”.

See Recommended Initial Settings in Chapter 6 for more information.

Summary of Contents for Fusion X2 PRO





































































Search results

Summary of Contents for Fusion X2 PRO

Reviews:

Related manuals for Fusion X2 PRO

Brands by name

Popular brands

Belanger Fusion X2 PRO, Owner'S Manual

Search results

Summary of Contents for Fusion X2 PRO

Reviews:

Related manuals for Fusion X2 PRO

Brands by name

Popular brands