Beko WTE7604XLW0, Owner'S Manual

Page: 40 / 56

40 / English Front-Loading Automatic Washer
User maintenance instructions
materials while cleaning the inner surface of the drum. Use soapy water with a damp cloth to wipe the
inner surface, then dry it and leave the door open to let inside dry properly.
Sanitary cycle with extra rinse option should be used for monthly cleaning of drum. To carry out this
procedure:
First be sure that the drum is empty.
Add 80ml of liquid chlorine bleach to the bleach container in the right compartment of the dispenser.
Select sanitary cycle, close the door and press “start/pause” button. At the completion of cycle, leave
the door open for drying of drum interior.
Monthly cleaning of the washer is necessary for removal of bacteria and mold residues and prevention
of unwanted odor in wash drum.
Cleaning the outer cabinet and control panel
When necessary:
• Wipe the exterior panels of your washer with soapy water or mild detergent. Dry it with a soft cloth.
• Use only a soft and damp cloth to clean the control panel.
C
CAUTION
¾
Never use a sponge or scrubbing material. These will damage the painted
and plastic parts.
Cleaning the water inlet strainers
There is a strainer at the end of each water inlet valve at the back side of the washer and also at the
end of each water inlet hose where they are connected to the faucets. These strainers prevent the
foreign substances and dirt in the water to enter into the washer. Strainers should be cleaned from
time to time.
• Close the water faucets.
• Remove the nuts of the water inlet hoses to clean the surfaces of the strainers on the water inlet
valves with an appropriate brush.
• If the strainers are very dirty, you can pull them out by means of pliers and clean them.
• Take out the strainers on the flat ends of the water inlet hoses together with the rubber seals and
clean thoroughly under running water.
• Replace the rubber seals and strainers carefully and tighten the hose nuts by hand.