Beko WTE7604XLW0 Owner'S Manual Download

Page: 11 / 56

Owner’s Guide & Installation Instructions

/ English

Installation Instructions

Allowable Clearances for Undercounter Installation

The dimensions are for the recommended spacing. Counter depth should be 23.5-24.5”(60-62 cm).

Custom undercounter installation – Washer only

Minimum counter width should be 50” (127 cm) for a pair of Blomberg washer & dryer.

Custom undercounter installation – Washer & Dryer

50Ó

(127 cm)

Allowable Clearances for Closet Installation

When installed in closet (washer only/washer dryer stacked) :

Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm)

Closet door ventilation requirement: A louver having minimum 23 in2 (148 cm2) air opening located at

3 in (7.62 cm) from the bottom of closet door.

Stacked Installation

You can stack your Blomberg washer and dryer (model no: DV 16540 NBL00) by using a special

stacking kit (Part No.2967100100). If necessary, consult your dealer or technical service for supplying

the stack kit. In stacked closet installation, following configuration is necessary:

A louver having minimum 23 in2 (148 cm2) air opening located at 3 in (7.62 cm) height from the

bottom of closet door (for washer) & A louver of minimum 46 in2 (297 cm2) air opening located at 3 in

(7.62 cm) distance from the top of closet door (for dryer).

Removing packaging reinforcement

Tilt the washer to remove the packaging reinforcement. Remove the packaging reinforcement by

pulling the ribbon.

Summary of Contents for WTE7604XLW0

























































Search results

Summary of Contents for WTE7604XLW0

Reviews:

Related manuals for WTE7604XLW0

Brands by name

Popular brands

Beko WTE7604XLW0, Owner'S Manual

Search results

Summary of Contents for WTE7604XLW0

Reviews:

Related manuals for WTE7604XLW0

Brands by name

Popular brands