Beko WTE7604XLW0 Page 7 Owner'S Manual Download

Page: 7 / 56

Owner’s Guide & Installation Instructions

/ English

WARNING

To reduce the risk of fire, electric shock or injury to persons while using your

appliance follow basic safety precautions, including the following:

• Read all instructions before using the washer.

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with

gasoline, dry-cleaning solvents, or other flammable or explosive substances (acetone, alcohol,

kerosene, some liquid household cleaners, some spot removers, turpentine, waxes and wax

removers) as they give off vapors that could ignite or explode.

• Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash

water. These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been

used for such a period, before using a washing machine, turn on all hot-water faucets and let the

water flow from each for several minutes. This will release any accumulated hydrogen gas. As the

gas is flammable, do not smoke or use an open flame this time.

• Do not allow children to play on or in the appliance. Close supervision of children is necessary

when the appliance is used near children.

• Before the appliance is removed from service or discarded, remove the door and the power cord /

main plug to prevent accidents.

• Do not reach into the appliance if the drum is moving. Wait until the drum has completely stopped

before opening the door.

• Do not install or store this appliance where it will be exposed to the weather and direct sunlight.

• Do not tamper with controls.

• Do not repair or replace any part of the appliance or attempt any servicing unless specifically

recommended in the user-maintenance instructions or in published user-repair instructions that

you understand and have the skills to carry out.

• This appliance must only be used for the purpose of washing, rinsing and spinning machine-

washable items using laundry additives that are suitable for use in washers . The appliance

manufacturer cannot be held responsible for damage caused by improper or unintended use of the

appliance.

• Only detergents, softeners and additives suitable for use in HE (High-efficiency) washers may be

used. Always follow the instructions and information given by the laundry detergent manufacturers

when using these products.

• Always follow the fabric care instructions of garment manufacturers.

• Do not touch the door glass while washing at high temperatures. Danger of burning!

• Do not sit on top of the washer.

• Do not climb onto the washer.

• Destroy the shipping carton, plastic bag and other packing materials after the washer is unpacked.

Keep children away from these packing materials. Danger of suffocation from plastic sheets and

Important Safety Instructions

Summary of Contents for WTE7604XLW0

























































Search results

Summary of Contents for WTE7604XLW0

Reviews:

Related manuals for WTE7604XLW0

Brands by name

Popular brands

Beko WTE7604XLW0, Owner'S Manual

Search results

Summary of Contents for WTE7604XLW0

Reviews:

Related manuals for WTE7604XLW0

Brands by name

Popular brands