Beko METPOINT BDL portable, Instructions For Installation And Operation Manual

Page: 48 / 108

Operation BDL
48 METPOINT® BDL
Main menu

Settings

Sensor settings

A1

Text field gas constant
The remaining text fields can be marked in the same manner as is described here, in Chapter 12.2.2.7
Marking and setting text fields !
Main menu  Settings  Sensor settings  A1
See also Chapter 12.2.2.1 Selection of the sensor type (Example type: digital sensor)
Note:
After having confirmed with OK , the lettering returns to black and the values and settings are accepted.
Caution:
Reference temperature and reference pressure (setting ex works 20°C, 1000 hPa):
All the volume flow (m³/h) and consumption values (m³) that are indicated on the display refer to 20°C
and 1000 hPa (according to ISO 1217 suction condition).
Alternatively, 0°C and 1013 hPa (=standard cubic metre according to DIN 1343) can also be entered
as the reference. Under no circumstances must the operating pressure or the operating temperature
be entered into the reference
conditions!
A preset selection of suitable gas constants .
The text fields with red letters show that
different values, such as the
diameter and
the name , were changed or added.
The three parameters flow rate, consump-
tion, and velocity are recorded (green tick),
after the data logger was activated.