Operation BDL
METPOINT® BDL
41
14.2.2.2 Denoting the measuring data and determining the resolution of the decimal places
Note:
The
resolution
of the decimal places,
short name
and
value name
can be found below the
tool button
!
Tool button:
Main menu
Settings
Sensor settings
A1
Tool button
See Chapter
12.2.2.7 Marking and setting text fields
Important:
In the menu items
Main menu
Settings
Sensor settings
and
Main menu
Current values,
the
value name
is only indicated on the BDL standard version with four channels!
The
short name
is only used in these two menu items, for the BDL version with one or two
extension boards (eight or 12 channels).
14.2.2.3 Recording measuring data
Main menu
Settings
Sensor settings
A1
Recording button
Caution:
Prior to recording the selected measuring data, the data logger must be activated subsequent to the
completion of the settings
(see Chapter 12.2.3 Logger settings (data logger)
For the
value
to be recorded, a
name
with
10 characters can be entered in order to
simplify its identification at a later moment in
the
menu
items
Graphics
and
Graphics/current values
.
Otherwise, the designation would be
A1a
,
for example.
A1
is the channel name and
a
is
the first
measured value in the channel, while
b
would be the second, and
c
the third.
The
resolution
of the decimal places is easi-
ly adjustable by pressing right and left (0 to
5 decimal places).
With the
recording
buttons, the measuring
data are selected which will be stored at an
activated data logger
.
Summary of Contents for METPOINT BDL portable
