Beko DRYPOINT RA 1000/AC NA, Operating Manual

Page: 29 / 52

Maintenance, troubleshooting, spares and dismantling
DRYPOINT RA 200 – 2500 NA 29
6.4. Maintenance operation on the refrigerating circuit
CAUTION!
Refrigerant fluid!
Maintenance and service on refrigerating systems must be carried out only by certified refrigerating
engineers only, according to local rules.
All the refrigerant of the system must be recovered for its recycling, reclamation or destruction.
Do not dispose the refrigerant fluid in the environment.
This dryer comes ready to operate and filled with R134a or R404A type refrigerant fluid
.
In case of refrigerant leak contact a certified refrigerating engineers. Room is to be aired before any
intervention.
If is required to re-fill the refrigerating circuit, contact a certified refrigerating engineers.
Refer to the dryer nameplate for refrigerant type and quantity
.
Characteristics of refrigerants used
:
Refrigerant Chemical formula TLV GWP
R134a - HFC CH2FCF3 1000 ppm 1300
R404A - HFC CH2FCF3/C2HF5/C2H3F3 1000 ppm 3784
6.5. Dismantling of the Dryer
If the dryer is to be dismantled, it has to be split into homogeneous groups of materials.
Part Material
Refrigerant fluid R404A, R134a, Oil
Canopy and Supports Carbon steel, Epoxy paint
Refrigerating compressor Steel, Copper, Aluminium, Oil
Alu-Dry Module Aluminium
Condenser Unit Aluminium, Copper, Carbon steel
Pipe Copper
Fan Aluminium, Copper, Steel
Valve Brass, Steel
Electronic Level Drain PVC, Aluminium, Steel
Insulation Material Synthetic gum without CFC, Polystyrene, Polyurethane
Electric cable Copper, PVC
Electric Parts PVC, Copper, Brass
We recommend to comply with the safety rules in force for the disposal of each type of material.
The chilling fluid contains droplets of lubrication oil released by the refrigerating compressor.
Do not dispose this fluid in the environment. Is has to be discharged from the dryer with a suitable device
and then delivered to a collection centre where it will be processed to make it reusable.