Beko BEKOMAT 33iU, Original Installation And Operation Manual

Page: 16 / 68

3.3 Function description
Illustration Description / explanation
K
C L
D
The condensate flows via the vertical condensate
inlet [C] or the horizontal condensate inlet [D] into the
BEKOMAT
®
and collects in the collecting container [K] .
The filling level in the collecting tank [K] is continuously
monitored by a capacitive sensor in the sensor tube [L] .
F
M
N K
Once the condensate has reached the maximum fill level,
the pilot valve [M] is activated using the controller.
The pilot valve [M] activates, and the area above the
membrane [N] is depressurised.
The membrane [N] lifts off of the valve seat and the
excess pressure in the collecting container [K] presses the
condensate into the condensate discharge [F] .
L
F
M
N
K
When the sensor in the sensor tube [L] is no longer
covered by condensate, the controller of the pilot
valve
[M] activates and pressure builds up above the
membrane [N] .
The membrane [N] is pressed against the valve seat and
the condensate discharge [F] is sealed tightly.
The switching cycle starts again with the inlet of
condensate.
BEKOMAT
®
33iU / 33iU CO Original installation and operation manual
16 | 68