BEKOMAT 31 stand alone
6
The power LED is lit up green when ope-
rating voltage is being applied.
Ready for operation
Power on
If the condensate discharge is not func-
tioning properly, the valve will keep open-
ing (about every 2 seconds) so as to clear
the fault automatically, if possible.
Test of valve function and manual
drainage:
Press button for approx. 2 se-
conds.
In response to longer pressing, the
valve will keep opening.
Do not use this function for conti-
nuous draining!
Function • Funcionamiento
Functionnement • Funcionamento
english
1
2
1
2
The condensate flows through the feed
line (
) into the BEKOMAT unit and ac-
cumulates in the container (
).
A capacitive sensor (
) continuously reg-
isters the liquid level and passes a signal
to the electronic control as soon as the
container is filled.
The pilot valve (
4
) is then activated and
the diaphragm (
5
) opens the outlet line
(
6
) for discharging the condensate.
When the BEKOMAT unit has been
emptied, the outlet line is closed again
quickly and tightly without wasting com-
pressed air.
4
5
6
Summary of Contents for BEKOMAT 31
Page 22: ...BEKOMAT 31 stand alone 22 ...
Page 23: ...BEKOMAT 31 stand alone 23 ...
