Beko B49L 8840, User Manual

Page: 213 / 344

Television / User Manual
99 / 115 TR
Tuning analogue television
channels
This setting is only necessary if you cannot
receive any digital channels and you have not
carried out an analogue search during initial
setup.
The television channel can be set directly or
using the search.
Setting all analogue television channels
The analogue television stations are listed in the
channel list after the digital television stations.
Note:
7
Plug the rooftop antenna cable (for ana-
logue television stations) into the
ANT IN
socket on the television.
1
Open the menu with »
MENU
«.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4
Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
5
Select the option »Air (DVB-T/T2)« or
»Cable (DVB-C)« with »
V
« or »
Λ
« and
confirm the source you are receiving analog
broadcast from by pressing »
OK
«.
6 Select the option »Digital« with »
V
« or
»
Λ
« and press » OK « to remove the small
tick.
7
Press »
y
« (red) to start searching.
SETTING FURTHER CHANNELS
-----------------------------------------------------
Notes:
7
After starting the scan, a security query will
appear. Press »
yy
« (green) to confirm the
option »Yes«.
– All channel and favourites lists for the
analogue channels will be deleted and
compiled new.
– The »Analog Searching« menu appears,
and the scan for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
– The search is complete as soon as the
»Search is completed!« appears.
Note:
7
The search can be ended prematurely with
»
EXIT «.
8
Press »
yyy
« (yellow) to switch to the Chan-
nel Editor;
or
press » EXIT « to end the setting.