Beko B49L 8840, User Manual

Page: 176 / 344

62 / 115 TR
Television / User Manual
ADVANCED SETTINGS
------------------------------------------------------------------------------
1
Open menu with »
MENU
« button.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select menu item »TV« with »
<
« or »
>
« and
press »
V
« to confirm.
– »TV« menu is active.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
Auto Sleep 4 Hours
Show Logo Display No
Power LED Backlight Medium
Power Saving Mode Off
Permanent Timeshift Off
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > TV > Advanced
Change Area Exit Back
BACK EXIT
Change Mode
Note:
7
Additional operations are explained in the
following sections.
Auto sleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup, un-
less the television receives any signal, or keys or,
according to European regulations, the remote
remains untouched for 5 minutes.
1
From the »Advanced« menu use »
V
« or
»
Λ
« to select the line »Auto Sleep«.
2 Select the switch-off time with »
<
« or »
>
«.
Note:
7
Set the function to »Off« with »
<
« or »
>
« to
switch off.
3
Press »
BACK
« to go back one menu
level or press »
EXIT
« to end the setting.
Store logo view
This function is intended for feature introduction
at stores. When »On« is selected, feature logos
are displayed.
1
From the »Advanced« menu use »
V
« or
»
Λ
« to select the line »Shop Logo Display«.
2
Select »Yes« with »
<
« or »
>
«.
Note:
7
Set the function to »No« with »
<
« or »
>
« to
switch off.
3
Press »
BACK
« to go back one menu
level or press »
EXIT
« to end the setting.
Power LED brightness
You can adjust power (stand-by) LED brightness
in operation mode of television.
1
From the »Advanced« menu use »
V
« or
»
Λ
« to select the line »Power LED Bright-
ness«.
2
Use »
<
« or »
>
« to set the brightness to
»High«, »Medium« or »Low«.
3
Press »
BACK
« to go back one menu
level or press »
EXIT
« to end the setting.