Beko B49L 8840, User Manual

Page: 158 / 344

44 / 115 TR
Television / User Manual
USB RECORDING
-------------------------------------------------------------------------------------------
Programme setting for record-
ing
... with electronic programme guide
Electronic programme guide data can be used
for recording.
25 EPG reminder and/or recorder can be set
in total.
1
Press »
GUIDE
« to open the electronic
programme guide.
2
Select the preferred TV program with »
V
«
or »
Λ
«.
– Information about the actual TV program
is displayed.
3
Press »
<
« or »
>
« to select the TV program
you want to record.
4
To add broadcasts to the timer press »
OK
«.
– Information for the TV program to be
recorded will be displayed.
5
Select the line »Record« with »
>
« and press
»
OK
« to confirm.
– Recording data range appears.
6
Press »
OK
« to confirm.
7
Press »
EXIT
« to end the menu.
Note:
7
If the data for the recording is to be
changed, open menu with »
MENU
«. Select
the menu item »Schedule List« with »
V
«,
»
Λ
«, »
<
« or »
>
« and confirm with »
OK
«.
Press »
yy
« (green), change the data and
and save it with »
yyyy
« (blue).
Notes:
7
A warning is displayed before the timer
recording starts and counts down for 10 sec-
onds to allow you to switch to the channel.
At the end of 10 seconds, the channel to be
recorded appears automatically.
7
If the timer recording starts during play-
back, playback stops. If you do not select
»Yes« in the warning prompt, recording
will start automatically at the end of the
countdown.
7
Only for UPC customers Note: Parts of
previous or next files can be included into
the record while the programme is being
recorded resulting from possible Programme
Guide errors. In such cases, keep in mind
that the highest family protection level will
apply for the whole recording if one or more
of those programmes have any level of fam-
ily protection.
Set the lead/follow-up time
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can „add“ up to 60 minutes to this time
1
Open the menu with »
MENU
«.
2
Select the menu item »Schedule List« with
»
V
«, »
Λ
«, »
<
« or »
>
« and press »
OK
« to
confirm.
3
Activade the »Padding Time« menu with
»
yyyy
« (blue).
4
Change the start time with »
<
« or »
>
«.
5
Use »
V
« to switch to the line »End« and
change the end time with »
<
« or »
>
«.
6
Select push button »Save« with »
V
« and
press »
OK
« to confirm.
7
Press »
EXIT
« to end the menu.