Beko 8690842090431 User Manual Download

Page: 10 / 84

10 / 80 EN

Fully Automatic Coffee Maker / User Manual

Important instructions for

safety and environment

•

Never immerse the coffee machine itself, the

mains cable or the mains plug into water or other

liquids.

•

Do not clean the coffee machine or accessories in

a dish washer.

•

Do not pour any other liquids apart from water or

place foodstuffs into the water tank.

•

Do not fill the water tank beyond the maximum

mark (lower edge of the filling hole) (1.4 litres).

•

Only operate the machine when the waste

container, drip tray and the cup grate are fitted.

•

Do not pull the cable to remove the plug from the

mains socket or touch with wet hands.

•

Do not hold the coffee machine with the mains

cable.

•

Keep the appliance and its cord out of reach of

children aged less than 8 years.

Summary of Contents for 8690842090431





















































































Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands

Beko 8690842090431, User Manual

Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands