Beko 8690842090431 User Manual Download Page 47

Page: 47 / 84

47 / 80 EN

Fully Automatic Coffee Maker / User Manual

5.19 Resetting the

unit to the factory

settings (Reset)

This function resets all previously

changed values to their original

factory settings.
The following settings and stored

values are affected:

•

Water hardness

•

Cup filling level

•

Coffee grinding quantity

•

Coffee temperature

•

Shut-off time

•

Water tank illumination

To reset the appliance to the

factory settings, proceed as follow:
Switch to the menu function by

simultaneously pressing buttons

2 and 3 for approx. 3 seconds. The

function displays of the menu will

flash first in a blinking line, the

current settings will be displayed.
Press and hold buttons 2 and 4 for

approx. 3 seconds.

Operation and use

The reset is confirmed by the

symbols flashing several times. The

appliance returns automatically to

the normal operating mode.

Summary of Contents for 8690842090431





















































































Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands

Beko 8690842090431, User Manual

Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands