manualshive.com logo in svg

Beko 8690842090431, User Manual

Share
Download
Beko 8690842090431 User Manual Download Page 9

9 / 80  EN

Fully Automatic Coffee Maker / User Manual

1     

Important instructions for 

safety and environment

 

•

This appliance can be used by children from the age 

of 8 up as well as by persons with reduced physical, 

sensory or mental abilities or with lacking experience 

and/or knowledge, if these persons are supervised 

or have been instructed how to use the appliance in 

a safe way and have understood the hazards which 

could arise from using it. Children must not play with 

the appliance. Cleaning and user maintenance shall 

not be made by children unless they are older than 8 

and supervised.

 

•

This appliance is intended to be used in household 

and similar applications such as:

-  staff kitchen areas in shops, offices and other 

working environments,

- farm houses,

-  by clients in hotels, motels and other residential 

type environments,

- bed and breakfast type environments.

 

•

Protect the coffee machine against the effects of 

weather such as rain, frost and direct sunlight. Do 

not use the coffee machine outdoors.

Summary of Contents for 8690842090431





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands