Beko 8690842090431 User Manual Download

Page: 76 / 84

76 / 80 EN

Fully Automatic Coffee Maker / User Manual

Troubleshooting

Problem

Cause

Remedy

“Empty grounds

container” is

displayed outside

the allowed

dispensed

quantities (6 - 14).

•

Waste container was

emptied while the

coffee machine was

switched off

•

Empty the waste

container only when

the coffee machine is

switched on.

•

Depending on

grinding fineness

and coffee filling

level, different size

coffee ground waste

is formed, resulting in

emptying cycles other

than indicated.

Water in the

waste container.

•

Water leaks into

the waste container

during each rinsing

process.

•

No remedy necessary

(technical reasons).

Coffee dispen-

sing too slow.

•

Grinding fineness set

too fine.

•

Set coarser grinding

fineness.

•

Grinding quantity set

too high.

•

Set ground coffee

quantity lower.

•

Water system is

calcified.

•

Start the descaling

program

Summary of Contents for 8690842090431





















































































Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands

Beko 8690842090431, User Manual

Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands