manualshive.com logo in svg

Beko 8690842090431, User Manual

Share
Download
Beko 8690842090431 User Manual Download Page 67

67 / 80  EN

Fully Automatic Coffee Maker / User Manual

6

  Cleaning and maintenance

3. Pull the milk hose out of the milk 

frother.

1

 

 

1

 

4. Fold the lever on the milk frother 

upwards and pull the milk frot-

her out towards you.

5. Clean both openings with a 

thin needle or with a thin brush 

(e.g. with a dental brush or the 

brush of the measuring spoon). 

Make sure that the openings are 

completely free after cleaning.

6. Remove the lid 1 from the milk 

frother.

7. Remove the milk frother nozz-

le from the milk frother by in-

serting the rounded end of the 

measuring spoon into the slot 

of the milk frother nozzle and 

turning 45° to pull it out. The 

nozzle is lifted up slightly during 

turning so that it can removed 

more easily.

1

 

 

1

 

8. Clean the milk frother nozzle 

with a thin needle or with a thin 

brush (e.g. with a dental brush or 

with the brush of the measuring 

spoon). Pay attention that the 

opening is completely free after 

cleaning.

1

 

 

1

 

Summary of Contents for 8690842090431





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands