Beko 8690842090431 User Manual Download

Page: 7 / 84

7 / 80 EN

Fully Automatic Coffee Maker / User Manual

Important instructions for

safety and environment

1.2 Danger of burning or scalding

Parts of the coffee machine can become very hot

during operation! Dispensed drinks and escaping

steam are very hot!

Observe the following safety precautions to avoid

burning/scalding yourself and/or others:

•

Do not touch either of the metal sleeves on both

coffee spouts.

•

Avoid direct contact of the skin with escaping

steam or hot rinsing, cleaning and descaling water.

1.3 Fundamental safety

precautions

Observe the following safety precautions to ensure

safe handling of the coffee machine:

•

Never play with packaging material. Risk of

suffocation.

•

Inspect the coffee machine for visible signs of

damage before use. Do not use a damaged coffee

machine.

Summary of Contents for 8690842090431





















































































Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands

Beko 8690842090431, User Manual

Search results

Summary of Contents for 8690842090431

Reviews:

Related manuals for 8690842090431

Brands by name

Popular brands