33
segment may be selected using
&
or
*
push
button. When
L_FACtor
for all of the segments has
been entered, return to the
FACtor-A
prompt in the
configuration menu by operating the
)
push button
twice.
7.8 Lineariser error message
If an attempt is made to position a segment at an
input frequency which is not greater than the
frequency of the preceding segment, or at an input
frequency which is not less than the frequency of the
following segment, the error message
VALuE
.
Err
will
be displayed.
To avoid generating an error it may be easier to
enter the bottom and top frequencies first and then
insert new break points between them.
7.9 Lineariser factory defaults
The linearisers factory defaults are two breakpoints,
producing one segment starting at 0Hz and finishing
at 5000Hz with an
L-FACtor
of 1.0.
Break point
PuL5E fr
L_FACtor
0:1
0Hz
1.00
1:1
5000Hz
1.00
