BEKA BA314E, Manual

Page: 39 / 58

Fig 16 Setpoint adjustment from the display mode
To adjust an alarm setpoint select 5P1 x or 5P2 x and
press
(
which will reveal the current setting. The
flashing digit of the setpoint may be adjusted using the
&
or
*
push button and the
(
button to transfer
control to the next digit. When the required setpoint
has been entered, pressing
)
will return the display
to the
5P1
x or
5P2
x prompt from which the other
setpoint may be selected, or the instrument may be
returned to the display mode by pressing
)
again.
Note: Direct access to the alarm setpoints is only
available when the menu is enabled - see
section 9.3.13
39